I was going to buy one, but the web page says it only supports Windows. If it works with Macs, I would have thought they would say so.lipi wrote:you know they don't work because you tried one and it didn't work, or you know they don't work because you read the webpage you linked and it listed only windows? unless it's the former, i still call baloney.[/list]
External Sound Cards for Laptop DJing
Moderators: Mr Awesomer, JesseMiner, CafeSavoy
This is probable true for all USB-based boxes, since there is a Audio-over USB standard that everybody seems to use. But there is no such standard for Firewire (IEEE1394), so you are more likely to need vendor-provided drivers for those. Which means that if they don't ship Mac drivers, it won't work on a Mac.lipi wrote:since we're talking laptops here, simply put: baloney. all external soundcards will work just as well on macs as they will on wintel boxes; all the common hardware interfaces are shared. the (usually fairly useless) applications that come with the device may not run on os x, but that's all.hear hear... a little research and shopping does indeed reveal wider options for the pc... much wider.
(an internal card for a desktop system is another matter.)
I have a M-Audio FastTrack Pro USB box which I bought to make recordings, since it has good mic inputs with phantom power etc. in addition to balanced and unbalanced line outputs. I haven't tried to DJ with it yet, but I plan to.
I decided to order one of these anyway, and it DOES work in my iMac G5. Lipi was right! The software supplied is Windows only, so that's no good, but the USB interface was literally 'plug and play'. (Why don't the manufacturers tell you the hardware works on Mac? - I'm sure they are losing sales as a result). It really boosts the output volume. For sound output, it's much better than the Edirol UA-1EX I had before. And the 'Volume Logic' plug-in seems to work well with it tooHaydn wrote:The Turtle Beach ones don't work on Macs. I know because I wanted to buy one for my Mac ...lipi wrote:all external soundcards will work just as well on macs as they will on wintel boxes
http://www.turtle-beach.com/site/produc ... cthome.asp
http://www.turtle-beach.com/site/produc ... oineed.asp
. I was thinking of getting a PC laptop for DJing, but this has made me think about getting a Mac one instead.probably because of qa and support resources. that is, assuring that this thing will work on another hardware platform or operating system takes time and people and hardware. then, once you say that a certain os is supported, you also have to make sure your support department is trained in using that os, has a machine available at all times to run that os and reproduce customer problems with, etc.(Why don't the manufacturers tell you the hardware works on Mac? - I'm sure they are losing sales as a result).
the mac market is too small to merit the extra expense required in qa and support. or, the market is perceived as too small by turtle beach. whether it really is, i cannot say.
kinda sucks, i know. (it took quite a while for the software company i work for to develop a mac product, because the market was perceived as small.)[/quote]
-
tornredcarpet
- Posts: 101
- Joined: Mon Jun 26, 2006 9:05 pm
- Location: Hampton Roads, VA
- Contact:
Offshoot from the 30's tracks sounding brighter thread
Since the XMod has become its own subject I thought I'd bring it into here...
If I'm reading this right... I can use it as a sound card, right?
And it works for Al Green?
If I'm reading this right... I can use it as a sound card, right?
And it works for Al Green?
Jesse (Los Angeles, CA/Hampton Roads, VA)
The Numark mixer I've been using for a little over a year has two USB connections so people can plug up to two laptops in and instantly have second 24 bit sound cards for free. I always get crystal clear sound and it's eliminated a lot of problems I've had with ground loops and loose connections. People can continue to use their laptop's built-in sound card for previewing songs. I haven't had any compatibility problems with any laptops so far including new and old Macs, PCs and a couple of Linux machines.
Re: External Sound Cards
Does anypne know if these work with Macs?Lars wrote:
This is what I use, an old Creative Soundblaster MP3. The sound has been perfect for every room that I've DJ'd in from large hall to small bar room setting even outdoors at the Calatrava.
"We called it music."
— Eddie Condon
— Eddie Condon
Which Numark mixer is it?scowl wrote:The Numark mixer I've been using for a little over a year has two USB connections so people can plug up to two laptops in and instantly have second 24 bit sound cards for free. I always get crystal clear sound and it's eliminated a lot of problems I've had with ground loops and loose connections. People can continue to use their laptop's built-in sound card for previewing songs. I haven't had any compatibility problems with any laptops so far including new and old Macs, PCs and a couple of Linux machines.
-
Bob the Builder
- Posts: 525
- Joined: Wed Jun 04, 2003 6:53 pm
- Location: Melbourne, Australia
- Contact:
Are you very, very sure it totally gets rid of Ground loops? How is it powered and does it have a balanced output.scowl wrote:The Numark mixer I've been using for a little over a year has two USB connections so people can plug up to two laptops in and instantly have second 24 bit sound cards for free. I always get crystal clear sound and it's eliminated a lot of problems I've had with ground loops and loose connections. People can continue to use their laptop's built-in sound card for previewing songs. I haven't had any compatibility problems with any laptops so far including new and old Macs, PCs and a couple of Linux machines.
A Balanced output at the source is the only 100% definate way to ensure you don't get ground loops.
-
Toon Town Dave
- Posts: 661
- Joined: Wed Nov 20, 2002 2:52 pm
- Location: Saskatoon, Canada
I'd venture a guess that the internal power supply isolates it from the wall supply and the communication with the computer is USB (digital) so ground loops shouldn't be a problem anywhere.
And to answer Kevin's question about the Soundblaster, I don't know if they work with Mac (I tend to think not) but even if they did, I'd probably recommend something else. I find the controls on the unit itself are next to useless, in particular, the mute button is really easy to activate and it will only un-mute in software. It behaves the same under Windows XP and Linux so I tend to think the hardware is the problem. I'll probably replace mine some time soon when I'm annoyed with it enough to spend some money.
And to answer Kevin's question about the Soundblaster, I don't know if they work with Mac (I tend to think not) but even if they did, I'd probably recommend something else. I find the controls on the unit itself are next to useless, in particular, the mute button is really easy to activate and it will only un-mute in software. It behaves the same under Windows XP and Linux so I tend to think the hardware is the problem. I'll probably replace mine some time soon when I'm annoyed with it enough to spend some money.
-
tornredcarpet
- Posts: 101
- Joined: Mon Jun 26, 2006 9:05 pm
- Location: Hampton Roads, VA
- Contact:
I got an Xmod in a Micro Center in Smyrna, GA for $64.
Worked on Jeff Miller's computer (a powermac) fine, worked on PCs as well just as well.
The surround sound thing i'm not too fond of... the crystallizer sound enhancer thing is cool though.. really brings out each instrument.
Worked on Jeff Miller's computer (a powermac) fine, worked on PCs as well just as well.
The surround sound thing i'm not too fond of... the crystallizer sound enhancer thing is cool though.. really brings out each instrument.
Jesse (Los Angeles, CA/Hampton Roads, VA)
The mixer's USB inputs go through isolation transformers. It's not possible to have a ground loop because there is literally no electrical connection between the USB inputs and anything else. There are no common grounds.Bob the Builder wrote:Are you very, very sure it totally gets rid of Ground loops?
It's powered from the AC and it has balanced outputs (don't all pro mixers have balanced outputs these days?).How is it powered and does it have a balanced output.
Isolation transformers are the only way I know to prevent them with digital sources (besides optical connections). They electrically remove the input from everything else. My experience with ground loops is that they occur when there is a voltage difference between the input's ground and the mixer's ground. This is usually a 60hz (in the US) AC voltage.A Balanced output at the source is the only 100% definate way to ensure you don't get ground loops.
